REAR WIPER RUBBER REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. REMOVE REAR WIPER BLADE


    1. A001WWK

      Lift the rear wiper arm and blade assembly as shown in the illustration.

    2. A001Y10

      Raise the rear wiper blade to the position where the claw disengages with a click sound as shown in the illustration.

      Note

      Be careful not to damage the claw.

    3. A001WVDC01
      B00497S Remove in this Direction

      Pull the rear wiper blade as shown in the illustration to remove it from the rear wiper arm.

      Note

      Place a piece of cloth between the rear wiper arm and back door glass to avoid damaging the back door glass.

  2. REMOVE REAR WIPER RUBBER


    1. Lift and pull the end of the rear wiper rubber over the blade stopper as shown in the illustration.

      A001YGHC02
      *a Stopper - -
      B00495X Push B0049DE Pull Out
      B00497S Remove in this Direction - -

      Note

      Do not forcibly pull out the rear wiper rubber as the rear wiper rubber backing plates may be deformed or the claws of the rear wiper blade may be damaged.

      Tech Tips

      Lightly pushing the middle of the rear wiper rubber will allow it to be removed more easily.

    2. Remove the rear wiper rubber with the 2 rear wiper rubber backing plates from the rear wiper blade.

    3. A001UR3C02
      B00497S Remove in this Direction

      Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.