FRONT WIPER RUBBER REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Note

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.

Tech Tips


  • Use the same procedure for the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WIPER BLADE


    1. A001US5C02
      *a Lock Button
      B00495X Push
      B00497S Remove in this Direction

      Push the lock button of the front wiper blade to release the lock.

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Place a piece of cloth between the front wiper arm and windshield glass to avoid damaging the windshield glass.

  2. REMOVE FRONT WIPER RUBBER

    Tech Tips

    The wiper rubber can be removed from either end of the front wiper blade.


    1. Pull the wiper rubber as indicated by the arrows, in the order shown in the illustration, until its end is aligned with the slits in the front wiper blade.

      A001VAUC02
      *a Slit - -
    2. A001U7PC01
      *a Slit
      *b Shield Cap
      B00497S Remove in this Direction

      Pull the end of the wiper rubber through the slits in the front wiper blade in the direction indicated by the arrow shown in the illustration and remove the wiper rubber.

      Note

      Make sure not to remove the shield caps. If a shield cap is removed, the wiper rubber may separate from the front wiper blade while driving.