3ZR-FAE DRIVE BELT INSTALLATION

PROCEDURE


  1. INSTALL FAN AND GENERATOR V BELT


    1. A001X1HN02

      Set the fan and generator V belt onto every pulley.

    2. Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly clockwise, remove the 5 mm bi-hexagon wrench.

      Note

      Check that the fan and generator V belt is properly set to each pulley.

  2. INSPECT FAN AND GENERATOR V BELT

    Click here

  3. INSTALL REAR ENGINE UNDER COVER RH


    1. Install the rear engine under cover RH to the vehicle with the 2 screws and 6 clips.