8NR-FTS DRIVE BELT INSTALLATION

PROCEDURE

1. INSTALL FAN AND GENERATOR V BELT

   
   

   1. Install the fan and generator V belt.

      Note

      Check that the fan and generator V belt is properly set to each pulley.

   2. 

      *a	5 mm Hexagon Wrench

      Turn the V-ribbed belt tensioner assembly counterclockwise and remove the 5 mm hexagon wrench.

2. INSPECT FAN AND GENERATOR V BELT

   Click here

3. INSTALL REAR ENGINE UNDER COVER RH

   
   

   1. Install the rear engine under cover RH to the vehicle with the 2 screws and 6 clips.