| Transmission coupling assembly runout |
Maximum vertical runout |
0.06 mm (0.00236 in.) |
| Maximum lateral runout |
0.07 mm (0.00276 in.) |
| Differential ring gear backlash |
0.088 to 0.208 mm (0.00347 to 0.00818 in.) |
| Differential drive pinion preload (starting torque) |
New bearing |
1.31 to 2.18 N*m (13 to 22 kgf*cm, 12 to 19 in.*lbf) |
| Reused bearing |
0.77 to 1.26 N*m (8 to 12 kgf*cm, 7 to 11 in.*lbf) |
| Total preload |
New bearing |
drive pinion preload + 1.18 to 1.90 N*m (12 to 19 kgf*cm, 10 to 16 in.*lbf) |
| Reused bearing |
drive pinion preload + 0.58 to 1.01 N*m (6 to 10 kgf*cm, 5 to 8 in.*lbf) |
| Rear differential side gear shaft washer thickness |
A0 |
1.59 to 1.61 mm (0.0625 to 0.0633 in.) |
| A1 |
1.62 to 1.64 mm (0.0637 to 0.0645 in.) |
| A2 |
1.65 to 1.67 mm (0.0650 to 0.0657 in.) |
| A3 |
1.68 to 1.70 mm (0.0661 to 0.0669 in.) |
| A4 |
1.71 to 1.73 mm (0.0673 to 0.0681 in.) |
| A5 |
1.74 to 1.76 mm (0.0685 to 0.0693 in.) |
| A6 |
1.77 to 1.79 mm (0.0697 to 0.0705 in.) |
| A7 |
1.80 to 1.82 mm (0.0709 to 0.0717 in.) |
| A8 |
1.83 to 1.85 mm (0.0720 to 0.0728 in.) |
| A9 |
1.86 to 1.88 mm (0.0732 to 0.0740 in.) |
| B0 |
1.89 to 1.91 mm (0.0744 to 0.0752 in.) |
| B1 |
1.92 to 1.94 mm (0.0756 to 0.0764 in.) |
| B2 |
1.95 to 1.97 mm (0.0768 to 0.0776 in.) |
| B3 |
1.98 to 2.00 mm (0.0780 to 0.0787 in.) |
| B4 |
2.01 to 2.03 mm (0.0792 to 0.0799 in.) |
| B5 |
2.04 to 2.06 mm (0.0803 to 0.0811 in.) |
| B6 |
2.07 to 2.09 mm (0.0815 to 0.0822 in.) |
| B7 |
2.10 to 2.12 mm (0.0827 to 0.0834 in.) |
| B8 |
2.13 to 2.15 mm (0.0839 to 0.0846 in.) |
| B9 |
2.16 to 2.18 mm (0.0850 to 0.0858 in.) |
| C0 |
2.19 to 2.21 mm (0.0862 to 0.0870 in.) |
| C1 |
2.22 to 2.24 mm (0.0874 to 0.0882 in.) |
| C2 |
2.25 to 2.27 mm (0.0886 to 0.0894 in.) |
| C3 |
2.28 to 2.30 mm (0.0898 to 0.0906 in.) |
| C4 |
2.31 to 2.33 mm (0.0909 to 0.0917 in.) |
| C5 |
2.34 to 2.36 mm (0.0921 to 0.0929 in.) |
| C6 |
2.37 to 2.39 mm (0.0933 to 0.0941 in.) |
| C7 |
2.40 to 2.42 mm (0.0945 to 0.0953 in.) |
| C8 |
2.43 to 2.45 mm (0.0957 to 0.0965 in.) |
| C9 |
2.46 to 2.48 mm (0.0969 to 0.0976 in.) |
| D0 |
2.49 to 2.51 mm (0.0980 to 0.0988 in.) |
| D1 |
2.52 to 2.54 mm (0.0992 to 0.1000 in.) |
| D2 |
2.55 to 2.57 mm (0.1004 to 0.1012 in.) |
| D3 |
2.58 to 2.60 mm (0.1016 to 0.1024 in.) |
| D4 |
2.61 to 2.63 mm (0.1028 to 0.1035 in.) |
| D5 |
2.64 to 2.66 mm (0.1040 to 0.1047 in.) |
| Rear differential drive pinion washer thickness |
90564-35041 |
41 |
1.695 to 1.705 mm (0.0667 to 0.0671 in.) |
| 90564-35043 |
43 |
1.715 to 1.725 mm (0.0675 to 0.0679 in.) |
| 90564-35045 |
45 |
1.735 to 1.745 mm (0.0683 to 0.0687 in.) |
| 90564-35047 |
47 |
1.755 to 1.765 mm (0.0690 to 0.0695 in.) |
| 90564-35049 |
49 |
1.775 to 1.785 mm (0.0699 to 0.0703 in.) |
| 90564-35051 |
51 |
1.795 to 1.805 mm (0.0707 to 0.0711 in.) |
| 90564-35053 |
53 |
1.815 to 1.825 mm (0.0715 to 0.0719 in.) |
| 90564-35055 |
55 |
1.835 to 1.845 mm (0.0722 to 0.0726 in.) |
| 90564-35057 |
57 |
1.855 to 1.865 mm (0.0730 to 0.0734 in.) |
| 90564-35059 |
59 |
1.875 to 1.885 mm (0.0738 to 0.0742 in.) |
| 90564-35061 |
61 |
1.895 to 1.905 mm (0.0746 to 0.0750 in.) |
| 90564-35063 |
63 |
1.915 to 1.925 mm (0.0754 to 0.0758 in.) |
| 90564-35065 |
65 |
1.935 to 1.945 mm (0.0762 to 0.0766 in.) |
| 90564-35071 |
71 |
1.955 to 1.965 mm (0.0770 to 0.0774 in.) |
| 90564-35073 |
73 |
1.975 to 1.985 mm (0.0778 to0.0781 in.) |
| 90564-35075 |
75 |
1.995 to 2.005 mm (0.0785 to 0.0789 in.) |
| 90564-35077 |
77 |
2.015 to 2.025 mm (0.0793 to 0.0797 in.) |
| 90564-35079 |
79 |
2.035 to 2.045 mm (0.0801 to 0.0805 in.) |
| 90564-35081 |
81 |
2.055 to 2.065 mm (0.0809 to 0.0813 in.) |
| 90564-35083 |
83 |
2.075 to 2.085 mm (0.0817 to 0.0821 in.) |
| 90564-35085 |
85 |
2.095 to 2.105 mm (0.0825 to 0.0829 in.) |
| 90564-35087 |
87 |
2.115 to 2.125 mm (0.0833 to 0.0837 in.) |
| 90564-35089 |
89 |
2.135 to 2.145 mm (0.0841 to 0.0844 in.) |
| 90564-35091 |
91 |
2.155 to 2.165 mm (0.0848 to 0.0852 in.) |
| 90564-35093 |
93 |
2.175 to 2.185 mm (0.0856 to 0.0860 in.) |
| 90564-35095 |
95 |
2.195 to 2.205 mm (0.0864 to 0.0868 in.) |
| Difference of dimension A and B: Transmission coupling shim thickness |
90564-25024 |
1 |
3.96 to 4.01 mm (0.156 to 0.157 in.): 1.98 to 2.02 mm (0.078 to 0.079 in.) |
| 90564-25025 |
2 |
4.26 to 4.31 mm (0.168 to 0.169 in.): 2.28 to 2.32 mm (0.090 to 0.091 in.) |
| 90564-25026 |
3 |
4.56 to 4.61 mm (0.180 to 0.181 in.): 2.58 to 2.62 mm (0.102 to 0.103 in.) |
| 90564-25027 |
4 |
3.81 to 3.86 mm (0.150 to 0.151 in.): 1.83 to 1.87 mm (0.072 to 0.074 in.) |
| 90564-25028 |
5 |
4.11 to 4.16 mm (0.162 to 0.163 in.): 2.13 to 2.17 mm (0.084 to 0.085 in.) |
| 90564-25029 |
6 |
4.41 to 4.46 mm (0.174 to 0.175 in.): 2.43 to 2.47 mm (0.096 to 0.097 in.) |
| 90564-25031 |
8 |
3.71 to 3.76 mm (0.146 to 0.148 in.): 1.73 to 1.77 mm (0.068 to 0.069 in.) |
| 90564-25032 |
9 |
3.76 to 3.81 mm (0.148 to 0.149 in.): 1.78 to 1.82 mm (0.070 to 0.071 in.) |
| 90564-25033 |
10 |
3.86 to 3.91 mm (0.152 to 0.153 in.): 1.88 to 1.92 mm (0.074 to 0.075 in.) |
| 90564-25034 |
11 |
3.91 to 3.96 mm (0.154 to 0.155 in.): 1.93 to 1.97 mm (0.076 to 0.077 in.) |
| 90564-25035 |
12 |
4.01 to 4.06 mm (0.158 to 0.159 in.): 2.03 to 2.07 mm (0.080 to 0.081 in.) |
| 90564-25036 |
13 |
4.06 to 4.11 mm (0.160 to 0.161 in.): 2.08 to 2.12 mm (0.082 to 0.083 in.) |
| 90564-25037 |
14 |
4.16 to 4.21 mm (0.164 to 0.165 in.): 2.18 to 2.22 mm (0.086 to 0.087 in.) |
| 90564-25038 |
15 |
4.21 to 4.26 mm (0.166 to 0.167 in.): 2.23 to 2.27 mm (0.088 to 0.089 in.) |
| 90564-25039 |
16 |
4.31 to 4.36 mm (0.170 to 0.171 in.): 2.33 to 2.37 mm (0.092 to 0.093 in.) |
| 90564-25040 |
17 |
4.36 to 4.41 mm (0.172 to 0.173 in.): 2.38 to 2.42 mm (0.094 to 0.095 in.) |
| 90564-25041 |
18 |
4.46 to 4.51 mm (0.176 to 0.177 in.): 2.48 to 2.52 mm (0.098 to 0.099 in.) |
| 90564-25042 |
19 |
4.51 to 4.56 mm (0.178 to 0.179 in.): 2.53 to 2.57 mm (0.100 to 0.101 in.) |
| 90564-25043 |
20 |
4.61 to 4.66 mm (0.182 to 0.183 in.): 2.63 to 2.67 mm (0.104 to 0.105 in.) |
| 90564-25044 |
21 |
4.66 to 4.71 mm (0.184 to 0.185 in.): 2.68 to 2.72 mm (0.106 to 0.107 in.) |