| Pedal height from clip | - | 179.5 to 193.5 mm (7.07 to 7.62 in.) |
| Pedal free play | - | 4.2 to 10.6 mm (0.165 to 0.417 in.) |
| Clutch release point from pedal full stroke end position | - | 25 mm (0.984 in.) or more |
| Pedal stroke (Reference) | - | 137.3 to 142.3 mm (5.41 to 5.60 in.) |
| Pedal height from floor panel | - | 177.8 to 191.8 mm (7.00 to 7.55 in.) |
| Pedal free play | - | 4.2 to 10.6 mm (0.165 to 0.417 in.) |
| Clutch release point from pedal full stroke end position | - | 25 mm (0.984 in.) or more |
| Pedal stroke (Reference) | - | 137.5 to 142.5 mm (5.41 to 5.61 in.) |
| Standard Voltage | Clutch Stroke Sensor Voltage | Clutch pedal fully released | 0.8 to 1.2 V |
| Clutch pedal fully depressed | 2.6 to 4.5 V |
| Standard Voltage | Clutch Stroke Sensor Voltage | Clutch pedal fully released | 0.8 to 1.2 V |
| Clutch pedal fully depressed | 2.6 to 4.5 V |
| Clutch disc rivet depth | Minimum | 0.3 mm (0.0118 in.) |
| Clutch disc runout | Maximum | 0.8 mm (0.0315 in.) |
| Clutch cover diaphragm spring wear | Maximum depth | 0.5 mm (0.0197 in.) |
| Maximum width | 6.0 mm (0.236 in.) | |
| Flywheel runout | Maximum | 0.1 mm (0.00394 in.) |
| Clutch cover diaphragm spring tip non-alignment | Maximum | 0.5 mm (0.0197 in.) |
| Clutch disc rivet depth | Minimum | 0.3 mm (0.0118 in.) |
| Clutch disc runout | Maximum | 0.8 mm (0.0315 in.) |
| Clutch cover diaphragm spring wear | Maximum depth | 0.5 mm (0.0197 in.) |
| Maximum width | 6.0 mm (0.236 in.) | |
| Flywheel runout | Maximum | 0.1 mm (0.00394 in.) |
| Clutch cover diaphragm spring tip non-alignment | Maximum | 0.5 mm (0.0197 in.) |
| Clutch start switch assembly resistance | ||
| 1 - 2 | On (Pushed in) | Below 1 Ω |
| Off (Released) | 10 kΩ or higher | |
| - | SAE J1703 or FMVSS No. 116 DOT3 |
| - | SAE J1704 or FMVSS No. 116 DOT4 |