8NR-FTS STARTING TORQUE SPECIFICATIONS

for Denso Made with Stop and Start System
Part Tightened				N*m	kgf*cm	ft.*lbf	in.*lbf
Starter commutator end frame assembly x Starter yoke assembly				1.5 N*m	15 kgf*cm		13 in.*lbf
Starter yoke assembly x Starter drive housing assembly				6.0 N*m	61 kgf*cm		53 in.*lbf
Magnet starter switch assembly x Starter drive housing assembly				7.5 N*m	76 kgf*cm		66 in.*lbf
Lead wire x Terminal 30				9.0 N*m	92 kgf*cm		80 in.*lbf
Starter assembly x Cylinder block sub-assembly				37 N*m	377 kgf*cm	27 ft.*lbf
Wire harness x Terminal 30				9.8 N*m	100 kgf*cm		87 in.*lbf

for Denso Made without Stop and Start System
Part Tightened				N*m	kgf*cm	ft.*lbf	in.*lbf
Starter yoke assembly x Starter drive housing assembly				3.0 N*m	31 kgf*cm		27 in.*lbf
Magnet starter switch assembly x Starter drive housing assembly				3.0 N*m	31 kgf*cm		27 in.*lbf
Starter assembly x Cylinder block sub-assembly				37 N*m	377 kgf*cm	27 ft.*lbf
Wire harness x Terminal 30				9.8 N*m	100 kgf*cm		87 in.*lbf

for Valeo Made Cold Area Specification Vehicles
Part Tightened				N*m	kgf*cm	ft.*lbf	in.*lbf
Starter assembly x Cylinder block sub-assembly				37 N*m	377 kgf*cm	27 ft.*lbf
Wire harness x Terminal 30				9.8 N*m	100 kgf*cm		87 in.*lbf

for Valeo Made except Cold Area Specification Vehicles
Part Tightened				N*m	kgf*cm	ft.*lbf	in.*lbf
Starter assembly x Cylinder block sub-assembly				37 N*m	377 kgf*cm	27 ft.*lbf
Wire harness x Terminal 30				9.8 N*m	100 kgf*cm		87 in.*lbf