REAR BUMPER INSTALLATION

PROCEDURE

1. INSTALL REAR BUMPER ASSEMBLY

   
   

   1. 

      Install in this Direction

      Connect the connector.

   2. Engage the 2 claws as shown in the illustration.

   3. 

      Install in this Direction

      Engage the 5 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

   4. Install the 4 screws.

   5. Install the rear bumper assembly with the 12 clips.

2. INSTALL REAR COMBINATION LIGHT COVER LH

   Click here

3. INSTALL REAR COMBINATION LIGHT COVER RH

   Tech Tips

   Use the same procedure for the LH side.

4. PERFORM CALIBRATION (w/ Intuitive Parking Assist System)

   Click here