REAR BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE REAR TURN SIGNAL LIGHT ASSEMBLY LH

    Click here

  2. REMOVE REAR TURN SIGNAL LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR SIDE ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

    Click here

  4. REMOVE REAR CORNER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

    Click here

  5. REMOVE REAR CENTER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

    Click here

  6. REMOVE REAR SIDE ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

    Click here

  7. REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

    Click here

  8. REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

    Click here

  9. REMOVE REAR BUMPER ENERGY ABSORBER


    1. A003NKO

      Remove the 2 screws.

    2. A003MUU

      Disengage the 3 clamps to remove the rear bumper energy absorber.

  10. REMOVE NO. 3 LUGGAGE ROOM WIRE


    1. A003JW3

      Disengage the 6 clamps and remove the No. 3 luggage room wire.

  11. REMOVE REAR BUMPER CENTER PAD


    1. A003O91

      Remove the 3 rear bumper center pads.

  12. REMOVE REAR BUMPER PLATE LH


    1. A003O3EC01
      *a Hook
      B006IFV Remove in this Direction

      Disengage the 2 claws as shown in the illustration.

    2. Disengage the hook to remove the rear bumper plate LH.

  13. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE REAR BUMPER CENTER GUARD


    1. Remove the 2 screws.

      A003NNT

    2. Disengage the 14 claws to remove the rear bumper center guard.

      A003LGV

  15. REMOVE NO. 1 REAR BUMPER PAD


    1. A003K50

      Remove the No. 1 rear bumper pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  16. REMOVE NO. 2 REAR BUMPER PAD


    1. A003NQE

      Remove the No. 2 rear bumper pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  17. REMOVE NO. 4 REAR BUMPER PAD


    1. A003KBJ

      Remove the No. 4 rear bumper pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  18. REMOVE NO. 3 REAR BUMPER PAD


    1. A003MHB

      Remove the No. 3 rear bumper pad.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  19. REMOVE REAR BUMPER SIDE RETAINER LH


    1. A003N26C01
      B006IFV Remove in this Direction

      Disengage the 3 clips as shown in the illustration.

    2. A003K5RC01
      B006IFV Remove in this Direction (1)
      B006IV0 Remove in this Direction (2)

      Disengage the claw as shown in the illustration.

    3. Disengage the guide as shown in the illustration to remove the rear bumper side retainer LH.

  20. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  21. REMOVE REAR BUMPER SIDE SEAL LH


    1. B006IPHC01
      *1 Rear Bumper Side Clip

      Remove the rear bumper side clip.

    2. Remove the 3 clips and rear bumper side seal LH.

  22. REMOVE REAR BUMPER SIDE SEAL RH

    Tech Tips

    Use the same procedure as for the LH side.

  23. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A003K82

      Remove the 8 bolts and rear bumper reinforcement sub-assembly.