ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Engage the 10 clips as shown in the illustration.

      A003M7EC01
      B006IFV Install in this Direction - -

    2. Install the 7 screws.

    3. Install the body rocker panel moulding assembly with new 7 clips.

  2. INSTALL REAR WHEEL HOUSE FRONT PLATE

    Click here