ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE

    Click here

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Apply protective tape around the body rocker panel moulding assembly and doors as shown in the illustration.

      A003MKXC01
      B006IOI Protective Tape - -

    2. Remove the 7 clips.

      A003OC1

    3. Remove the 7 screws.

      A003O46

    4. Disengage the 10 clips as shown in the illustration to remove the body rocker panel moulding assembly.

      A003NJVC01
      B006IFV Remove in this Direction - -