REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY


    1. Engage the claw to temporarily install the rear light assembly.

    2. Install the rear light assembly with the 3 nuts.

      Torque:
      5.9 N*m  { 60 kgf*cm, 52 in.*lbf }

    3. Connect the connector.

  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  3. INSTALL DOOR PULL HANDLE

    Click here