REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT REAR LIGHT ASSEMBLY LH

   

   *a	Component without harness connected (Rear Light Assembly LH)

   
   

   1. Apply auxiliary battery voltage to the rear light assembly LH and check that the light illuminates.

      OK
      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Taillight illuminates

      If the result is not as specified, replace the rear light assembly LH.

2. INSPECT REAR LIGHT ASSEMBLY RH

   

   *a	Component without harness connected (Rear Light Assembly RH)

   
   

   1. Apply auxiliary battery voltage to the rear light assembly RH and check that the light illuminates.

      OK
      Condition Specified Condition Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 2 Taillight illuminates

      If the result is not as specified, replace the rear light assembly RH.