CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE
INSTALL REAR COMBINATION LIGHT ASSEMBLY
Engage the grommet.
| *a | Pin |
| *b | Guide |
|
Install in this Direction |
Engage the 2 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.
Install the rear combination light assembly with the 2 screws.
Remove the protective tape.
Connect the connector.
INSTALL REAR COMBINATION LIGHT COVER
|
Install in this Direction |
Engage the 2 claws as shown in the illustration.
|
Install in this Direction |
Engage the 4 claws to install the rear combination light cover as shown in the illustration.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for RH Side)
INSTALL ROPE HOOK (w/o Toyota Safety Sense)
INSTALL NO. 2 ROPE HOOK (w/o Toyota Safety Sense)
INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Toyota Safety Sense)
INSTALL TONNEAU COVER HOOK A (w/ Toyota Safety Sense)
INSTALL REAR SEAT SIDE GARNISH
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY
INSTALL REAR UNDER SIDE COVER
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
INSTALL REAR DOOR SCUFF PLATE
INSTALL REAR SEAT CUSHION LOCK HOOK
INSTALL REAR SEAT CUSHION ASSEMBLY LH (for LH Side)
INSTALL REAR SEAT CUSHION ASSEMBLY RH (for RH Side)
INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)
INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)
INSTALL REAR SEATBACK HINGE COVER (for RH Side)
INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)
INSTALL REAR DECK TRIM COVER
INSTALL DECK TRIM SERVICE HOLE COVER
INSTALL DECK FLOOR BOX RH
INSTALL DECK FLOOR BOX LH
INSTALL REAR NO. 1 FLOOR BOARD
INSTALL REAR NO. 3 FLOOR BOARD
INSTALL REAR NO. 4 FLOOR BOARD
INSTALL REAR NO. 2 FLOOR BOARD
INSTALL TONNEAU COVER ASSEMBLY