ADAPTIVE HIGH BEAM SYSTEM DTC CHECK / CLEAR


  1. CHECK FOR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / AHS / Trouble Codes.


      Body Electrical > AHS > Trouble Codes

    5. Check for DTCs.

      Click here

      Tech Tips


      • As lighting system DTCs may also be output, if DTC B2414, B242C, B242D, B242E, B2439, B243A, B243B, B243C, B243D, B243E, U0073, U0100, U0101, U0126, U0129, U0142, U0155, U023A, U0242, U0293 or U1000 is output, refer to Diagnostic Trouble Code Chart for the lighting system.

        Click here

      • As automatic headlight beam level control system DTCs may also be output, if DTC B2415, B2416, B2417, B2418, B241A, B2424, B2425, B2450, B2451, B2452 or B2456 is output, refer to Diagnostic Trouble Code Chart for the automatic headlight beam level control system.

        Click here

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / AHS / Trouble Codes.


      Body Electrical > AHS > Clear DTCs

    5. Clear the DTCs.