HEADLIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. A003NNOC01
      B006IFV Install in this Direction

      Engage the guide to temporarily install the headlight assembly as shown in the illustration.

    2. A003N7WC01
      *a Bolt
      *b Screw

      Install the headlight assembly with the bolt and 3 screws.

      Torque:
      Bolt
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
    3. A003KZ2C01
      *a Connector Lock Lever
      B006IFV Connect in this Direction

      Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

    4. Remove the protective tape.

  2. INSTALL FENDER APRON MUDGUARD SEAL SUB-ASSEMBLY


    1. A003LYWC01
      B006IFV Install in this Direction

      Engage the clip as shown in the illustration.

    2. A003OQK

      Install the fender apron mudguard seal sub-assembly with the clip.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  4. PERFORM INITIALIZATION

    Click here

  5. ADJUST HEADLIGHT AIMING

    Click here