SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. A003P8FC07
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly LH)

      Apply auxiliary battery voltage to the side turn signal light assembly LH and check that the light illuminates.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2

      Auxiliary battery negative (-) → Terminal 1

      		 Side turn signal light LH illuminates

      If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    1. A003P8FC07
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly RH)

      Apply auxiliary battery voltage to the side turn signal light assembly RH and check that the light illuminates.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2

      Auxiliary battery negative (-) → Terminal 1

      		 Side turn signal light RH illuminates

      If the result is not as specified, replace the side turn signal light assembly RH.