PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.
| System Name | See Procedure |
|---|---|
| Lane Departure Alert System (w/ Steering Control) | |
| Intelligent Clearance Sonar System | |
| Parking Assist Monitor System | |
| Simple Intelligent Parking Assist System | |
| Power Door Lock Control System | |
| Pre-crash Safety System | |
| Adaptive High Beam System |
PRECAUTION FOR BULB REPLACEMENT
Always prepare a new bulb for immediate replacement. While replacing the bulb, the lens may attract dust and moisture if the bulb is removed from the vehicle for a long time.
Always replace a bulb with another bulb of the same wattage.
If only replacing the bulb on one side, differences in brightness and lighting color between the right and left sides may occur.
Securely install the socket after bulb replacement. The lens may become cloudy or the light assembly may fill with water through gaps around the socket if it is not installed securely.
PRECAUTIONS FOR INSPECTING CHARGE LID ILLUMINATION
Refer to the precaution of Plug-in Charge Control System when inspecting the charge lid illumination.