WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.

      Standard
      Washer fluid contacts the windshield in the areas shown in the illustration.
      A003O64C01
      *a Upper Limit *b Standard
      *c Lower Limit - -
      B006IOI Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 286.0 mm (11.3 in.) B 129.8 mm (5.11 in.)
      C 183.8 mm (7.24 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.