WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL LH

    Click here

  2. REMOVE FRONT FENDER LINER LH


    1. A003M5B

      Remove the 3 screws.

    2. A003P96

      Remove the 5 screws and grommet.

    3. A003KTOC01
      *a 90°

      Using a screwdriver, turn each pin hold clip 90 degrees and remove the 2 pin hold clips.

    4. A003OT8

      for Rough Road Area Specification Vehicles:


      1. Remove the clip.

    5. A003LV2

      Remove the 9 clips and front fender liner LH.

  3. DRAIN WASHER FLUID


    1. A003N8BC01

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A003ONDC01
      B006IFV Remove in this Direction

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.