WIPER AND WASHER SYSTEM CUSTOMIZE PARAMETERS


  1. WIPER AND WASHER SYSTEM CUSTOMIZE

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Wiper.

      5. Select the setting by referring to the table below.


        Wiper
        Tester Display Description Default Setting ECU
        Auto Wiper Function to enable AUTO wiper operation Avail 0:Avail,1:Not Avl Rain Sensor

        Tech Tips

        Changes to the customize settings will not be applied until the power switch is turned off then on (IG).