FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY

   
   

   1. Connect the connector.

   2. Engage the 2 claws to install the fuel lid lock with motor assembly.

2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

   
   

   1. 

      	Install in this Direction (1)
      	Turn in this Direction (2)

      Install the fuel filler opening lid lock retainer as indicated by the arrows, the order shown in the illustration.

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

4. INSTALL ROPE HOOK (w/o Toyota Safety Sense)

   Click here

5. INSTALL NO. 2 ROPE HOOK (w/o Toyota Safety Sense)

   Click here

6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Toyota Safety Sense)

   Click here

7. INSTALL TONNEAU COVER HOOK A (w/ Toyota Safety Sense)

   Click here

8. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

9. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

   Click here

10. INSTALL REAR UNDER SIDE COVER LH

    Click here

11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

12. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

13. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

14. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

15. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

16. INSTALL REAR SEAT HEADREST ASSEMBLY

    Click here

17. INSTALL REAR DECK TRIM COVER

    Click here

18. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

19. INSTALL DECK FLOOR BOX RH

    Click here

20. INSTALL DECK FLOOR BOX LH

    Click here

21. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

22. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

23. INSTALL REAR NO. 4 FLOOR BOARD

    Click here

24. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

25. INSTALL TONNEAU COVER ASSEMBLY

    Click here