OUTER REAR VIEW MIRROR DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR

    Click here

  2. REMOVE OUTER MIRROR COVER WITH OUTER MIRROR HOLE COVER

    Click here

  3. REMOVE OUTER MIRROR COVER

    Click here

  4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

    Click here

  5. REMOVE NO. 2 OUTER MIRROR COVER


    1. A003N6W

      Disengage the 2 claws and guide to remove the No. 2 outer mirror cover.

  6. REMOVE OUTER MIRROR RETRACTOR (w/ Automatic Retractable Mirror)


    1. A003LQXC01
      *a Cut here

      Cut the wire harness sub-assembly at the position shown in the illustration.

    2. A003KGQ

      Disengage the 3 guides and remove the gasket sub-assembly.

      Note

      Make sure to replace the gasket sub-assembly with a new one.

    3. A003KSZ

      Disengage the 5 claws and guide to remove the lower cover.

    4. A003MSP

      Using a T25 "TORX" socket wrench, remove the 3 screws and base sub-assembly.

    5. A003O2G

      Remove the 3 screws.

    6. A003NGM

      Disconnect the connector.

    7. Disengage the 2 clamps.

    8. A003OZF

      Disconnect the connector to remove the actuator sub-assembly.

    9. A003ORBC01
      B006IFV Remove in this Direction

      Pull the wire harness sub-assembly through the frame sub-assembly as shown in the illustration to remove the wire harness sub-assembly.

      Note

      Make sure to replace the wire harness sub-assembly with a new one.

    10. A003NB5

      Remove the 2 screws.

    11. A003LWK

      Remove the 2 screws and frame sub-assembly from the housing.

      Note

      Make sure to replace the frame sub-assembly with a new one.