RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT IG-B RELAY


    1. A003KRIC82
      *a

      Component without harness connected

      (IG-B Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the IG-B relay.

  2. INSPECT FAN NO. 2 RELAY


    1. A003KRIC82
      *a

      Component without harness connected

      (FAN NO. 2 Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      • If the result is not as specified, replace the FAN NO. 2 relay.