| DTC Code | DTC Name |
|---|---|
| B1472/72 | A/C Inverter High Voltage Output System Malfunction |
DESCRIPTION
The inverter in the compressor with motor assembly outputs high-voltage electricity to operate the motor. If there is an open or short in the output circuit, the hybrid vehicle control ECU will stop compressor operation and store this DTC. This DTC will be stored as a history DTC. The compressor operation remains stopped until both the history and current DTCs are cleared.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory |
|---|---|---|---|---|
| B1472/72 | A/C Inverter High Voltage Output System Malfunction | Open or short in A/C inverter high voltage output circuit |
|
Memorized |
CAUTION / NOTICE / HINT
CAUTION:
Before inspecting the high-voltage system, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs for both systems are output simultaneously.
PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
Using the GTS, check if the CAN communication system is functioning normally.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
REPLACE COMPRESSOR WITH MOTOR ASSEMBLY Click here |
| B |
|
GO TO CAN COMMUNICATION SYSTEM Click here |