REAR SEAT OUTER BELT ASSEMBLY ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the rear 3 point type seat outer belt assembly.

PROCEDURE


  1. INSPECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the rear 3 point type seat outer belt assembly installed to the vehicle.


      1. The defects to be checked are as follows:


        • Cuts on the rear 3 point type seat outer belt assembly

        • Small cracks on the rear 3 point type seat outer belt assembly

        • Significant discoloration on the rear 3 point type seat outer belt assembly

        OK
        No defects are found.

        Tech Tips

        If any defects are found, replace the rear 3 point type seat outer belt assembly with a new one.

  2. INSPECT REAR 3 POINT TYPE SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)


    1. Perform a diagnostic system check.

      Click here

    2. Visually check for defects with the rear 3 point type seat outer belt assembly removed from the vehicle.


      1. The defects to be checked are as follows:


        • Cuts on the rear 3 point type seat outer belt assembly

        • Small cracks on the rear 3 point type seat outer belt assembly

        • Significant discoloration on the rear 3 point type seat outer belt assembly

        • Cracks or other damage on the connector

        OK
        No defects are found.

        Tech Tips

        If any defects are found, replace the rear 3 point type seat outer belt assembly with a new one.