Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Warning.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Driver Side Seatbelt Warning Buzzer | Function to sound the driver seat belt warning buzzer | ON | 0:OFF,1:ON | Combination meter assembly (Meter circuit plate) |
| Front Passenger Side Seatbelt Warning Buzzer | Function to sound the front passenger seat belt warning buzzer | ON | 0:OFF,1:ON | Combination meter assembly (Meter circuit plate) |
| Rear Seatbelt Warning Buzzer | Function to sound the rear seat belt warning buzzer | ON | 0:OFF,1:ON | Combination meter assembly (Meter circuit plate) |
Tech Tips
This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.