FRONT SEAT CUSHION HEATER(for Power Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY (DRIVER SEAT)


    1. A003OTNC03
      *a

      Component without harness connected

      (Front Seat Cushion Heater Assembly (Driver Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      b6-1 - B-3 Seat heater temperature 20°C (68°F) Below 1 Ω
      b6-2 - B-2 Seat heater temperature 20°C (68°F) 1.6 to 1.9 Ω
      b6-3 - B-1 Seat heater temperature 20°C (68°F) 2.8 to 3.5 Ω

      If the result is not as specified, replace the front seat cushion heater assembly (driver seat).