HEADUP DISPLAY SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever a meter DTC is detected, the combination meter mirror ECU stores the current vehicle state as freeze frame data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Head Up Display / Trouble Codes.

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.

      Head Up Display
      Tester Display Condition Displayed Item
      B150A Lost Communication with HMI-LAN

      • Trip

      • Elapsed time after turning the power switch on (IG)
      U0100 Lost Communication with ECM / PCM "A"
      U0142 Lost Communication with Body Control Module "B"
      U0163 Lost Communication with Navigation Control Module
      U023A* Lost Communication with Front Camera Module
      U1104* Lost Communication with Driving Support ECU

      • *: w/ Pre-crash Safety System

  3. Note

    Clearing the DTCs will also clear the freeze frame data.

    CLEAR FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Clear DTCs and freeze frame data.

      Click here


      Body Electrical > Head Up Display > Clear DTCs