METER / GAUGE SYSTEM Hybrid System Indicator Malfunction

DESCRIPTION

A hybrid system indicator has been included on this vehicle. In this circuit, the combination meter assembly (meter circuit plate) receives the eco-zone indicator level signal from the hybrid vehicle control ECU via CAN communication. The combination meter assembly (meter circuit plate) controls the operation of the hybrid system indicator according to the eco-zone indicator level signal received from the hybrid vehicle control ECU via CAN communication.

WIRING DIAGRAM

B006I8LE17
*1 Hybrid Vehicle Control ECU
*2 CAN Communication Line
*3 Combination Meter Assembly (Meter Circuit Plate)

CAUTION / NOTICE / HINT

Note


  • When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

  • Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Check if CAN communication DTCs are output.

      Click here

      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    B

    GO TO CAN COMMUNICATION SYSTEM Click here

    A

  2. CHECK FOR DTC (HYBRID CONTROL SYSTEM)


    1. Check if hybrid control system DTCs are output.

      Click here


      Powertrain > Hybrid Control > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    B

    GO TO HYBRID CONTROL SYSTEM Click here

    A

  3. READ VALUE USING GTS (HV SYSTEM INDICATOR)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Combination Meter > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      HV System Indicator Hybrid system indicator value Min.: -512%, Max.: 511% -512 to 511% -

      Body Electrical > Combination Meter > Data List
      Tester Display
      HV System Indicator
      OK
      Hybrid system indicator value displayed on the GTS is almost the same as the hybrid system indicator indication.
      Result
      Proceed to
      OK
      NG

    OK

    REPLACE HYBRID VEHICLE CONTROL ECU Click here

    NG

    REPLACE COMBINATION METER ASSEMBLY (METER CIRCUIT PLATE) Click here