FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Connect the connector.

    2. Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

  2. INSTALL LOWER CENTER PILLAR GARNISH

    Click here

  3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

    Click here

  4. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    Click here

  6. INSTALL REAR DOOR SCUFF PLATE

    Click here

  7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

    Click here

  8. INSTALL FRONT DOOR SCUFF PLATE

    Click here