ROOM LIGHT REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    1. A003N5EC01
      *a Protective Tape
      B006IKP Front

      Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the No. 1 room light lens.

    2. A003LNUC01
      *a Protective Tape
      B006IKP Front
      B006IFV Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the No. 1 room light housing.

    3. A003M1MC01
      *1 Room Light Switch Base

      Disengage the clamp.

    4. Disengage the 4 claws to disconnect the room light switch base from the No. 1 room light housing.

  2. REMOVE NO. 1 ROOM LIGHT BULB


    1. Remove the No. 1 room light bulb from the room light switch base.