VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. SEPARATE VANITY LIGHT ASSEMBLY


    1. A003MW3

      Using a moulding remover, disengage the claw to separate the vanity light assembly.

  2. REMOVE VANITY LIGHT BULB


    1. A003LFYC01
      B006IFV Remove in this Direction

      Remove the vanity light bulb from the bulb holder as shown in the illustration.

  3. INSTALL VANITY LIGHT BULB


    1. A003MQPC01
      B006IFV Install in this Direction

      Install the vanity light bulb to the bulb holder as shown in the illustration.

  4. INSTALL VANITY LIGHT ASSEMBLY


    1. A003LLR

      Engage the claw to install the vanity light assembly.