METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.

    CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning.

      5. Select the setting by referring to the table below.


        Warning
        Tester Display Description Default Setting ECU
        Reverse Buzzer Function to change the reverse warning buzzer type Continual 00:Continual,01:Single Combination meter assembly (Meter circuit plate)
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Medium 10:Large,00:Medium,01:Small Combination meter assembly (Meter circuit plate)

      6. Enter the following menus: Customize Setting / Display.

      7. Select the setting by referring to the table below.


        Display
        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the power switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly (Meter circuit plate)