THEFT DETERRENT SYSTEM SYSTEM DESCRIPTION


  1. OUTLINE OF THEFT DETERRENT SYSTEM


    • The theft deterrent system can be set by locking the doors using any of the following operations:


      • Entry lock operation

      • Wireless lock operation

      • Key linked lock operation

      • Opening and closing the doors

        Tech Tips

        Vehicles not Displaying the Item "Security control with mechanism key" on the GTS Vehicles Displaying the Item "Security control with mechanism key" on the GTS
        Entry lock operation ○ ○
        Wireless lock operation ○ ○
        Key linked lock operation ○ -
        Opening and closing the doors ○ -

        • ○: Available

        • -: Not Available

    • In the armed state, the alarm function will be activated if one of the following conditions is met:


      • Any of the doors is unlocked.

      • Any of the doors or the engine hood is opened.

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement inside the cabin.*

      • The back door glass or back window fix glass is broken.*


      • *: w/ Intrusion Sensor

    • In the alarm sounding state, the system blinks the turn signal lights. At the same time, the system sounds the vehicle horns and theft warning siren assembly to deter break-in and theft as well as to warn people around the vehicle.

    • The theft deterrent system can be canceled by unlocking the doors using any of the following operations:


      • Entry lock operation

      • Wireless lock operation

      • Key linked lock operation

        Tech Tips

        Vehicles not Displaying the Item "Security control with mechanism key" on the GTS Vehicles Displaying the Item "Security control with mechanism key" on the GTS
        Entry lock operation ○ ○
        Wireless lock operation ○ ○
        Key linked lock operation ○

        -

        (○)*

        *: This function is set through the customize function.

        Click here


        • ○: Available

        • -: Not Available

    • The theft deterrent system has an active arming mode. There are 4 states in this mode; a disarmed state, an arming preparation state, an armed state and an alarm sounding state.


    1. Disarmed state:


      • The alarm function is not operating.

      • The theft deterrent system is not operating.

    2. Arming preparation state:


      • The time until the system goes into the armed state.

      • The theft deterrent system is not operating.

    3. Armed state:


      • The theft deterrent system is operating.

    4. Alarm sounding state:


      • The alarm function is operating.

      Alarm Methods
      Alarm Method Turn Signal Lights Blinking
      Vehicle Horns

      Sounding

      (Approximately 0.4-second cycles)
      Theft Warning Siren Assembly Sounding

  • FUNCTION OF MAIN COMPONENTS

    Component Function
    Security indicator light Informs driver of theft deterrent system status.
    Theft warning siren assembly Sounds when attempted break-in or theft is detected.
    Turn signal lights Blink when attempted break-in or theft is detected.
    Vehicle horns Sound when attempted break-in or theft is detected.

    • Front door courtesy light switch assembly (for LH/RH)

    • Rear door courtesy light switch assembly (for LH/RH)

    • Back door courtesy light switch

    		 Detects door status (open or closed).
    Door unlock detection switch Detects door status (locked or unlocked).
    Engine hood courtesy switch (Hood lock assembly) Detects engine hood status (open or closed).
    Intrusion sensor cancel function*

    • Sends a signal to the main body ECU (multiplex network body ECU) to disable the intrusion sensor (theft warning ultrasonic sensor).*

    • Sends a signal to the main body ECU (multiplex network body ECU) to disable the glass breakage sensor.*
    Intrusion sensor* Sends a signal to the main body ECU (multiplex network body ECU) to sound the alarm when detecting an intrusion.
    Glass breakage sensor* Sends a signal to the main body ECU (multiplex network body ECU) to sound the alarm when detecting breakage of back door glass or back window fix glass.
    Certification ECU (Smart key ECU assembly)

    • Receives wireless door lock/unlock signal.

    • Receives entry door lock/unlock signal.

  • ACTIVE ARMING MODE


    1. Active arming mode:

      This system operates as described in the diagram below when one of the items for each condition is met.

      Tech Tips

      The term "all doors" used in this section refers to the driver door, front passenger door, rear door LH, rear door RH and back door.

      A003K5HE24
      Vehicles not displaying the item "Security control with mechanism key" on the GTS
      Condition Item
      Condition [1]

      In disarmed state 1, when the power switch is turned off, the system state is changed if the following condition is met:


      • With all doors and the engine hood closed, all doors are locked by wireless operation, the entry and start system or key linked power door lock operation.

      In disarmed state 1, when the power switch is off, the engine hood is closed and all doors are locked, the system state is changed if the following condition is met:


      • All doors are closed when any door is open.
      Condition [2]

      • Approximately 30 seconds elapse.
      Condition [3]

      • All doors are unlocked by wireless operation, the entry and start system or key linked power door lock operation.

      • Any door is unlocked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.
      Condition [4]

      • The engine hood is opened when it was closed.

      • The auxiliary battery is reconnected while the engine hood is open or any door is unlocked.

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked.

      • When 5 seconds or more have elapsed since the power switch was pressed, the power source mode is changed from off to on (IG) without pressing the power switch.
      Condition [5]

      • The power switch is turned on (READY).

      • All doors are unlocked by wireless operation, the entry and start system or key linked power door lock operation.

      • The power switch is turned on (ACC) or on (IG) within 5 seconds after the power switch is pushed.
      Condition [6]

      • After approximately 27.5 seconds, the alarm stops and the system returns to the armed state.
      Condition [7]

      • The engine hood is closed when it was open.
      Condition [8]

      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.

      • All doors are unlocked by wireless operation, the entry and start system or key linked power door lock operation.
      Condition [9]

      In disarmed state 1, when the power switch is turned off, the system state is changed if the following condition is met:


      • With all doors closed and the engine hood open, all doors are locked by wireless operation, the entry and start system or key linked power door lock operation.

      In disarmed state 1, when the power switch is off, the engine hood is open and all doors are locked, the system state is changed if the following condition is met:


      • All doors are closed when any door is open.
      Condition [10]

      • The engine hood is opened.
      Vehicles displaying the item "Security control with mechanism key" on the GTS
      Condition Item
      Condition [1]

      In disarmed state 1, when the power switch is turned off, the system state is changed if the following condition is met:


      • With all doors and the engine hood closed, all doors are locked by wireless operation or the entry and start system.
      Condition [2]

      • Approximately 30 seconds elapse.
      Condition [3]

      • All doors are unlocked by wireless operation, the entry and start system or key linked power door lock operation.

      • Any door is unlocked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.
      Condition [4]

      • The engine hood is opened when it was closed.

      • The auxiliary battery is reconnected while the engine hood is open or any door is unlocked.

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement within the vehicle.*

      • The main body ECU (multiplex network body ECU) detects breakage of the glass breakage sensor (back door glass or back window fix glass).*

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked.

      • When 5 seconds or more have elapsed since the power switch was pressed, the power source mode is changed from off to on (IG) without pressing the power switch.

      • The engine hood is open.

      • Any door is opened.

      • The power source mode is on (IG).

      Note

      Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. If any of the windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the windows open. When parking the vehicle with the windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel function.*
      Condition [5]

      • The power switch is turned on (READY).

      • All doors are unlocked by wireless operation or the entry and start system.
      Condition [6]

      • After approximately 27.5 seconds, the alarm stops and 5 seconds later the system returns to the armed state.
      Condition [7]

      • The engine hood is closed when it was open.
      Condition [8]

      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • The power switch is pushed.

      • The power switch is turned on (ACC) or on (IG).

      • The auxiliary battery is reconnected.

      • All doors are unlocked by wireless operation or the entry and start system.
      Condition [9]

      In disarmed state 1, when the power switch is off, the system state is changed if the following condition is met:


      • With all doors closed and the engine hood open, all doors are locked by wireless operation or the entry and start system.
      Condition [10]

      • The engine hood is opened.

      • *: w/ Intrusion Sensor

  • FORCED DOOR LOCK CONTROL


    1. The forced door lock control prevents the vehicle from being tampered with. Immediately after a door is unlocked (armed state), all doors are forced to lock by a forced door lock signal.


      1. If the following conditions are met, the forced door lock control is operated.


        • The theft deterrent system is in the armed state.

        • Any door is unlocked.

  • PANIC ALARM CONTROL (w/ Panic Switch)


    1. Panic alarm control makes it possible to voluntarily set off the panic alarm by pressing the panic switch on the electrical key transmitter sub-assembly.


      1. Conditions that cause panic alarm control to set off the panic alarm:

        The panic switch on the electrical key transmitter sub-assembly is pressed under the following conditions:


        • The power switch is off.

        • The theft deterrent system is not in the alarm sounding state.

      2. Conditions that cause the panic alarm control to shut off the alarm:

        Any of the following conditions is met during panic alarm control operation:


        • The power switch is turned on (IG).

        • The panic switch is pressed again.

        • Any of the switches on the electrical key transmitter sub-assembly (lock/unlock) is pressed.

        • The panic alarm ends (approximately 27.5 seconds have elapsed).

        • The theft deterrent system switches to the alarm sounding state. Under this condition, the theft deterrent system controls the alarm rather than the panic alarm control. In order to cancel this alarm, refer to the theft deterrent system alarm sounding state cancellation procedure.

  • INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Intrusion Sensor)

    Note

    Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. If any of the windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the windows open. When parking the vehicle with the windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel function.


    1. The main body ECU (multiplex network body ECU) activates the intrusion sensor (theft warning ultrasonic sensor) when the system changes from the disarmed state to the arming preparation state. If an intrusion detection signal is input from the intrusion sensor (theft warning ultrasonic sensor) while in the armed state, the main body ECU (multiplex network body ECU) changes to the alarm sounding state in order to output an alarm.

    2. When the theft deterrent system is in the disarmed state, the intrusion sensor (theft warning ultrasonic sensor) can be disabled through the settings screen on the multi-information display.

    3. The intrusion sensor (theft warning ultrasonic sensor) may erroneously detect intrusion in the following situations:


      • Persons or pets are in the vehicle.

      • The vehicle is parked in a place where extreme vibrations or noises occur, such as in a parking garage.

      • Ice or snow is removed from the vehicle, causing the vehicle to receive repeated impacts or vibrate.

      • The wind or something similar causes an externally mounted reflectively coated windshield cover to move.

      • The intrusion sensor (theft warning ultrasonic sensor) may react to a hanger or other objects hanging in the cabin if they drop or swing.

      • The system changes to the armed state even if any of the windows is open. The intrusion sensor (theft warning ultrasonic sensor) may react to objects moving outside the vehicle when any of the windows is open.

      • The vehicle is inside an automatic or high-pressure car wash.

      • The vehicle experiences impacts, such as hail, lightning strikes and other kinds of repeated impacts or vibrations.

  • CHECK INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Intrusion Sensor)


    1. Turn the power switch off.

    2. Make sure all of the windows and doors and the engine hood are closed.

    3. Lock all of the doors through wireless operation or the entry lock function and check that the security indicator light illuminates (system changes to the arming preparation state).

    4. Approximately 30 seconds after locking all of the doors through wireless operation or the entry lock function, check that the security indicator light is blinking (system is in the armed state). Then, check that the alarm function operates (system changes to the alarm sounding state) due to movement inside the vehicle.

      Tech Tips

      If the electrical key transmitter sub-assembly is within an exterior detection area, the intrusion sensor (theft warning ultrasonic sensor) will not operate.

    5. Perform an unlock operation using the wireless or entry operation to stop the alarm.

  • CHECK INTRUSION SENSOR CANCEL FUNCTION (w/ Intrusion Sensor)


    1. Turn the power switch off.

    2. Make sure all of the windows and doors and the engine hood are closed.

    3. Enter the settings screen on the multi-information display and disable the intrusion sensor (theft warning ultrasonic sensor).

    4. Lock all of the doors through wireless operation or the entry lock function and check that the security indicator light illuminates (system changes to the arming preparation state).

    5. Approximately 30 seconds after locking all of the doors through wireless operation or the entry lock function, check that the security indicator light is blinking (system is in the armed state). Then, check that the alarm function does not operate (system does not change to alarm sounding state) due to movement inside the vehicle.

      Tech Tips


      • Even if the intrusion sensor (theft warning ultrasonic sensor) is off, the theft deterrent system will be in the armed state. Therefore, if any of the doors is manually unlocked, the alarm will operate.

      • If the electrical key transmitter sub-assembly is within an exterior detection area, the intrusion sensor (theft warning ultrasonic sensor) will not operate.

  • GLASS BREAKAGE SENSOR (w/ Intrusion Sensor)


    1. The main body ECU (multiplex network body ECU) detects breakage of the glass breakage sensor (back door glass or back window fix glass). If the main body ECU (multiplex network body ECU) detects breakage of the glass breakage sensor (back door glass or back window fix glass) while the theft deterrent system is in the armed state, it will sound the alarm for 27.5 seconds.

  • THEFT WARNING SIREN ASSEMBLY


    1. The theft warning siren assembly has an internal battery. If power to the theft warning siren assembly is interrupted or the communication line is open, the theft warning siren assembly detects it and sounds the alarm using the internal battery.

    2. The theft warning siren assembly has the following alarm controls: normal alarm control and open circuit alarm control. Under normal alarm control, the alarm sounds based on instructions from the main body ECU (multiplex network body ECU) whereas under open circuit alarm control, the theft warning siren assembly judges current security conditions and sounds the alarm by itself.


      1. Normal alarm control

        The theft warning siren assembly sounds when the theft deterrent system is in the alarm sounding state and does not sound when the system is not in the alarm sounding state.

        Tech Tips

        If the communication between the theft warning siren assembly and main body ECU (multiplex network body ECU) is continuously interrupted for 70 seconds or more while the theft deterrent system is in the alarm sounding state, the theft warning siren assembly will stop sounding.

      2. A003NKKE05

        Open circuit alarm control

        The theft warning siren assembly changes between the disarmed state and armed state in accordance with the change of the theft deterrent system between the disarmed state and armed state. If the power source, ground or communication line becomes open while the theft warning siren assembly is in the armed state, the theft warning siren assembly will sound.

        During the open circuit alarm sounding state, the theft warning siren assembly sounds intermittently for 27.5 seconds and then stops for 5 seconds. This pattern repeats a maximum of 9 times.

        This intermittent sounding will stop when either of the following conditions is met:

        1. The theft warning siren assembly changes to the disarmed state.

        2. The circuit returns to normal.

        A003NHXE08

  • SECURITY INDICATOR LIGHT OUTPUT


    1. According to the state of the theft deterrent system, the main body ECU (multiplex network body ECU) outputs a signal to turn the security indicator light on. However, some of the actual lighting conditions of the security indicator light are different from the output signals of the main body ECU (multiplex network body ECU).

      Output
      State of Theft Deterrent System Security Indicator Light
      Output Signal from Main Body ECU (Multiplex Network Body ECU) Actual Lighting Condition
      Disarmed state (1), (2) Off

      • Off (Immobiliser system unset)

      • Blinking (Immobiliser system set)
      Arming preparation state On On
      Armed state Off Blinking
      Alarm sounding state On On
      Blinking Cycle
      Time Security Indicator Light
      0.125 sec. On
      1.875 sec. Off

      Tech Tips

      When the immobiliser system is set, the security indicator light blinks during both the disarmed state and the armed state due to output signals from the immobiliser system.