| DTC Code | DTC Name |
|---|---|
| B2779 | Engine Starter Communication Malfunction |
DESCRIPTION
When an internal malfunction occurs in the certification ECU (smart key ECU assembly), the certification ECU (smart key ECU assembly) stores this DTC.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B2779 | Engine Starter Communication Malfunction | An internal malfunction occurs in the certification ECU (smart key ECU assembly). | Certification ECU (smart key ECU assembly) | DTC output confirmation operation:
|
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| - | - |
| DTC No. | Data List and Active Test |
|---|---|
| B2779 | - |
CAUTION / NOTICE / HINT
Note
Before replacing the certification ECU (smart key ECU assembly), refer to Service Bulletin.
After performing repairs, confirm that no DTCs are output by performing "DTC Output Confirmation Operation."
PROCEDURE
CHECK CAN COMMUNICATION SYSTEM
Check for CAN communication system DTCs.
| OK |
|---|
| CAN communication DTCs are not output. |
| Result | |||
|---|---|---|---|
|
| NG |
|
GO TO CAN COMMUNICATION SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here |
| OK |
|
READ VALUE USING GTS (WIRELESS C CODE)
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry&Start / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Wireless C Code | Registration status between remote engine starter ECU and certification ECU (smart key ECU assembly) | No Regd or Regd | No Regd: Remote starter ID not registered to remote engine start ECU and certification ECU (smart key ECU assembly) Regd: Remote starter ID registered to remote engine start ECU and certification ECU (smart key ECU assembly) |
Problems may be caused by the following:
|
| Tester Display |
|---|
| Wireless C Code |
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
REPLACE REMOTE ENGINE STARTER ECU Click here |
| A |
|
REGISTER REMOTE ENGINE STARTER ID
Register the remote engine starter ID.
Tech Tips
Refer to Service Bulletin.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK REMOTE ENGINE STARTER FUNCTION
Check the remote engine starter function.
| OK |
|---|
| Remote engine starter functions operate normally. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (REMOTE ENGINE STARTER ID WAS NOT REGISTERED) |
| NG |
|
REPLACE REMOTE ENGINE STARTER ECU
Temporarily replace the remote engine starter ECU with a new one.
Register the remote engine starter ID.
Tech Tips
Refer to Service Bulletin.
Check the remote engine starter function.
| OK |
|---|
| Remote engine starter functions operate normally. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (REMOTE ENGINE STARTER ECU WAS DEFECTIVE) |
| NG |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
Temporarily replace the main body ECU (multiplex network body ECU) with a new one.
Tech Tips
Refer to Service Bulletin.
Check the remote engine starter function.
| OK |
|---|
| Remote engine starter functions operate normally. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) WAS DEFECTIVE) |
| NG |
|
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |