ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the clamp as shown in the illustration and install the No. 3 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 3 indoor electrical key antenna assembly. If the No. 3 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

2. INSTALL REAR FLOOR FRONT BATTERY COVER BOARD

   Click here

3. INSTALL REAR SEAT CONSOLE BOX ASSEMBLY

   Click here

4. INSTALL REAR CONSOLE BOX COVER

   Click here

5. INSTALL REAR UNDER COVER

   Click here

6. INSTALL REAR UNDER SIDE COVER LH

   Click here

7. INSTALL REAR UNDER SIDE COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

8. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

9. INSTALL REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

10. INSTALL REAR SEAT ASSEMBLY

    Click here

11. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

12. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

13. INSTALL TONNEAU COVER ASSEMBLY

    Click here