BACK DOOR LOCK INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY

   Tech Tips

   Make sure to remove the string before installing a new back door lock assembly.

   
   

   1. Apply MP grease to the sliding parts of the back door lock assembly.

   2. Using a T30 "TORX" socket wrench, install the back door lock assembly with the 2 collars and 2 screws.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   3. Connect the connector.

2. INSTALL BACK DOOR LOCK COVER

   Click here

3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

4. INSTALL DOOR PULL HANDLE

   Click here