DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT DOOR CONTROL SWITCH ASSEMBLY


    1. A003K0VC04
      *a

      Component without harness connected

      (Door Control Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      4 - 5 Lock switch pushed Below 200 Ω
      4 - 5 Lock switch not pushed 1 MΩ or higher
      2 - 5 Unlock switch not pushed 1 MΩ or higher
      2 - 5 Unlock switch pushed Below 200 Ω

      If the result is not as specified, replace the door control switch assembly.