SOLAR CHARGING SYSTEM UTILITY


  1. Tech Tips


    • With "All Readiness", you can check if DTC judgment has been completed by using the GTS.

    • Make sure to perform "All Readiness" after simulating malfunction symptoms or finishing repairs.

    ALL READINESS


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Clear the DTCs even if no DTCs are stored.


      Powertrain > Solar Charging Control > Clear DTCs

    5. Turn the power switch off and wait for 2 minutes or more.

    6. Turn the power switch on (IG).

    7. Perform the confirmation driving pattern.

    8. Enter the following menus: Powertrain / Solar Charging Control / Utility / All Readiness.


      Powertrain > Solar Charging Control > Utility
      Tester Display
      All Readiness

    9. Input the DTCs to be confirmed.

    10. Check the DTC judgment result.

      GTS Display Description
      Normal

      • DTC judgment completed

      • System normal
      Abnormal

      • DTC judgment completed

      • System abnormal
      Incomplete

      • DTC judgment not completed

      • Perform the driving pattern
      N/A

      • Unable to perform DTC judgment

      • Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit

      • Perform the driving pattern

      If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.

    11. Turn the power switch off.

  2. DIAGNOSIS RELATED INFORMATION


    1. Check for diagnosis related information.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Solar Charging Control / Utility / Diagnosis Related Information.

      5. Check the diagnosis related information, and take a note of it.

    2. Clear diagnosis related information.

      Note

      Clearing the DTCs will also clear the diagnosis related information.


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Solar Charging Control / Trouble Codes.


        Powertrain > Solar Charging Control > Clear DTCs

      5. Clear the DTCs, diagnosis related information and freeze frame data.

      6. Turn the power switch off.

  3. VEHICLE CONTROL HISTORY


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Solar Charging Control / Utility / Vehicle Control History.


      Powertrain > Solar Charging Control > Utility
      Tester Display
      Vehicle Control History

      Click here

    5. Turn the power switch off.