SIMPLE INTELLIGENT PARKING ASSIST SYSTEM CALIBRATION


  1. ADJUST SIMPLE INTELLIGENT PARKING ASSIST SYSTEM


    1. If the following operations are performed, it is necessary to perform adjustments and checks on the diagnostic screen.

      Part Name Operation Adjustment Item Proceed to
      Steering sensor
      • Removal and installation of the steering sensor

      • Removal and installation of the connector of the steering sensor

      • Replacement

      Steering angle neutral point (Initialize intelligent clearance sonar system)

      Click here

      Suspension, tires, etc. The vehicle height changes because of suspension or tire replacement Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      Front bumper assembly
      • Replacement

      • Installation position of the front bumper cover changes because of the removal and installation of the front bumper cover

      Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      Rear bumper assembly
      • Replacement

      • Installation position of the rear bumper cover changes because of the removal and installation of the rear bumper cover

      Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      Clearance warning ECU assembly Replacement Ultrasonic sensor detection angle
      Bumper type registration
      Ultrasonic sensor detection angle registration
      Steering angle neutral point
      Ultrasonic sensor*1*2
      • Removal and installation

      • Replacement

      Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      An ultrasonic sensor becomes misaligned Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      An ultrasonic sensor is subjected to impact Ultrasonic sensor detection angle
      Ultrasonic sensor detection angle registration
      Auxiliary battery Cable is disconnected from the negative (-) auxiliary battery terminal Steering angle neutral point

      • *1: If a front side ultrasonic sensor (LH, RH) is removed and installed or replaced, it is necessary to perform Registration.

      • *2: If a rear side ultrasonic sensor (LH, RH) is removed and installed or replaced, it is necessary to perform Registration.