INTELLIGENT CLEARANCE SONAR SYSTEM, Diagnostic DTC:C1AF0

DTC Code DTC Name
C1AF0 ICS Detection Area Adjustment Incomplete

DESCRIPTION

When ICS detection area adjustment is incomplete, the clearance warning ECU assembly stores DTC C1AF0.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AF0 ICS Detection Area Adjustment Incomplete ICS detection area adjustment incomplete

  • Intelligent clearance sonar detection area adjustment

  • Clearance warning ECU assembly

CAUTION / NOTICE / HINT

Note


  • After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  • After replacing an ultrasonic sensor or the clearance warning ECU assembly, perform the necessary procedures (adjustment, calibration, initialization or registration).

    Click here

  • When continuing with the inspection, confirm that the necessary procedures (adjustment, calibration, initialization or registration) have been completed before proceeding.

PROCEDURE


  1. INTELLIGENT CLEARANCE SONAR SYSTEM REGISTRATION


    1. Perform intelligent clearance sonar system registration.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Using the GTS, check for DTCs according to the prompts on the screen.

      Click here


      Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes

    2. Clear the DTCs according to the screen on the GTS.

      Click here


      Body Electrical > IPA/ICS/Clearance Sonar > Clear DTCs

    3. Recheck for DTCs.

      Click here


      Body Electrical > IPA/ICS/Clearance Sonar > Trouble Codes

      Tech Tips

      If DTC C1AF0 is still output after performing intelligent clearance sonar system registration 3 times, replace the clearance warning ECU assembly.

      Result
      Result Proceed to
      DTC C1AF0 is output A
      DTC C1AF0 is not output B

    A

    REPLACE CLEARANCE WARNING ECU ASSEMBLY Click here

    B

    USE SIMULATION METHOD TO CHECK Click here