INTELLIGENT CLEARANCE SONAR SYSTEM PROBLEM SYMPTOMS TABLE

Tech Tips


  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

General
Symptom Suspected Area Link
System does not operate at all TOYOTA parking assist-sensor system

Click here

CAN communication system

Click here

Clearance warning ECU assembly

Click here

System cannot be turned off CAN communication system

Click here

Clearance warning ECU assembly

Click here

Sonar Function
Symptom Suspected Area Link
Detection function operates when the operating conditions are not met Hybrid control system

Click here

Clearance warning ECU assembly

Click here

Detection function operates when vehicle is not within the required speed range (speedometer not malfunctioning) Clearance warning ECU assembly

Click here

Buzzer Function
Symptom Suspected Area Link
Intelligent clearance sonar system is normal but buzzer operation is intermittent Check that the temporary mute function is not operating -
Proceed to "Clearance Warning Buzzer Circuit"

Click here

Clearance warning ECU assembly

Click here

Meter circuit plate

Click here

Display Function
Symptom Suspected Area Link
While the ICS system is operating, no ICS notifications are displayed on the multi-information display. Clearance warning ECU assembly

Click here

Meter circuit plate

Click here

While the ICS system is operating, no ICS notifications are displayed on the headup display.* Clearance warning ECU assembly

Click here

Combination meter mirror ECU

Click here

"ICS Malfunction Visit Your Dealer" is displayed Meter circuit plate

Click here

Clearance warning ECU assembly

Click here

"ICS Unavailable" is displayed Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point (Intelligent clearance soner system registration)

Click here

CAN communication system

Click here

Meter circuit plate

Click here

Clearance warning ECU assembly

Click here

ICS does not operate when there is a possibility of a collision (Warning message "ICS Unavailable" not displayed) Check the installation of the ultrasonic sensors (front)

Click here

Check the installation of the ultrasonic sensors (rear)

Click here

Adjust the installation of the ultrasonic sensors as necessary.

Click here

Ultrasonic sensors (front)

Click here

Ultrasonic sensors (rear)

Click here

Clearance warning ECU assembly

Click here

ICS control operates when there is no possibility of a collision Check the installation of the ultrasonic sensors (front)

Click here

Check the installation of the ultrasonic sensors (rear)

Click here

Adjust the installation of the ultrasonic sensors as necessary.

Click here

Ultrasonic sensors (front)

Click here

Ultrasonic sensors (rear)

Click here

Clearance warning ECU assembly

Click here

ICS control cannot be turned off (ICS OFF indicator does not illuminate) Meter circuit plate (LED): Perform Active Test (Indicat. ICS OFF LCD)

Click here

Steering pad switch assembly

Click here

Clearance warning ECU assembly

Click here

ICS OFF indicator blinks Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point (Intelligent clearance soner system registration)

Click here