NAVIGATION ECU INSTALLATION

PROCEDURE


  1. INSTALL NAVIGATION ECU

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 2 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 2 screws.

    2. Engage the wiring harness clamp.

  4. INSTALL TELEPHONE ANTENNA CORD SUB-ASSEMBLY


    1. Engage the 2 clamps.

    2. Connect the connector to install the telephone antenna cord sub-assembly.

  5. INSTALL NO. 1 NAVIGATION WIRE


    1. Engage the clamp.

    2. Connect the 2 connectors to install the No. 1 navigation wire.

  6. INSTALL NAVIGATION ECU WITH BRACKET

    A003NLYC01
    B006IFV Install in this Direction

    1. Engage the 2 guides and 2 clips as shown in the illustration to install the navigation ECU with bracket.

  7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here

  8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here