NAVIGATION RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL NAVIGATION RECEIVER ASSEMBLY

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 screws.

  3. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 screws.

  4. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET


    1. Connect each connector.

    2. A003LOJC01
      B006IFV Install in this Direction

      Engage the 2 guides to temporarily install the navigation receiver assembly with bracket as shown in the illustration.

    3. Install the navigation receiver assembly with bracket with the 4 bolts.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here