NAVIGATION SYSTEM(for Navigation Receiver Type) Cellular Phone Inspection

PROCEDURE


  1. CHECK USAGE CONDITION


    1. Check that the vehicle and cellular phone meet the following conditions:

      Note

      If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.


      • The cellular phone is "Bluetooth" compatible.

        Click here

      • The cellular phone is registered as a hands-free device.

      • "Bluetooth" setting of the cellular phone is on.

      • Operating system and software of the cellular phone are the latest versions.

      • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

    2. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END

    B

  2. RESTART CELLULAR PHONE


    1. Restart the cellular phone.

    2. Turn the power switch off.

    3. Turn the power switch on (ACC).

    4. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END

    B

  3. CHECK OPERATION


    1. Check if the in-vehicle device can be recognized by the cellular phone.

      Result
      Result Proceed to
      In-vehicle device can be recognized. A
      In-vehicle device cannot be recognized. B

    B

    GO TO STEP 5 Click here

    A

  4. REGISTER AGAIN


    1. Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.

    2. Register the cellular phone again.

    3. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END

    B

  5. CHECK USING ANOTHER VEHICLE


    1. Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

      Tech Tips


      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    B

  6. CHECK USING ANOTHER CELLULAR PHONE


    1. Check if the system functions normally using another "Bluetooth" compatible cellular phone.

      Tech Tips


      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

    B

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here