POWER STEERING SYSTEM, Diagnostic DTC:C1521, C1522, C1523, C1528, C1531, C1532, C1533, C1534, C1555

DTC Code DTC Name
C1521 Short in Motor Circuit
C1522 Power Supply Sensor
C1523 Current Deviation Excessive
C1528 Motor Rotation Angle Sensor
C1531 ECU Malfunction
C1532 ECU Malfunction
C1533 Temperature Sensor Circuit is Low or High
C1534 EEPROM
C1555 Motor Relay Welding Failure

DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note
C1521 Short in Motor Circuit Motor overcurrent Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1522 Power Supply Sensor Motor current sensor malfunction Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1523 Current Deviation Excessive Excessively large current deviation Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1528 Motor Rotation Angle Sensor Motor rotation angle sensor malfunction Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1531 ECU Malfunction

ECU internal malfunction

(CPU malfunction)

 Power steering ECU assembly EPS warning light: Comes on The ECU judges the system has returned to normal or the power switch is turned on (IG) again -
C1532 ECU Malfunction

ECU internal malfunction

(Peripheral circuit malfunction)

 Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1533 Temperature Sensor Circuit is Low or High

ECU internal malfunction

(Substrate temperature sensor malfunction)

 Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1534 EEPROM

ECU internal malfunction

(EEPROM error)

 Power steering ECU assembly EPS warning light: Comes on Power switch on (IG) again -
C1555 Motor Relay Welding Failure Motor relay circuit malfunction Power steering ECU assembly EPS Warning Light: Comes on Power switch on (IG) again -

CAUTION / NOTICE / HINT

Note

If the power steering ECU assembly has been replaced, perform assist map writing and torque sensor zero point calibration.

Click here

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > EMPS > Clear DTCs

    2. Check for DTCs.

      Click here


      Chassis > EMPS > Trouble Codes
      Result
      Result Proceed to
      DTCs other than C1521, C1522, C1523, C1528, C1531, C1532, C1533, C1534 or C1555 are not output. A
      DTCs other than C1521, C1522, C1523, C1528, C1531, C1532, C1533, C1534 or C1555 are output. B

    A

    REPLACE POWER STEERING ECU ASSEMBLY for LHD: Click here
    REPLACE POWER STEERING ECU ASSEMBLY for RHD: Click here

    B

    GO TO DIAGNOSTIC TROUBLE CODE CHART Click here