BRAKE BOOSTER PUMP(for RHD) DISPOSAL

PROCEDURE


  1. DISPOSE OF BRAKE BOOSTER PUMP ASSEMBLY


    1. Remove the accumulator from the brake booster pump assembly.

    2. Secure the accumulator in a vise.

    3. A003KYQE01

      Using a hacksaw, make a cut in the side of the accumulator within location (A) to release the high-pressure gas.

      Location Length
      A 25 mm (0.984 in.)
      B 60 mm (2.36 in.)

      CAUTION:

      A003NPF

      • Wear protective glasses.

      • Small pieces of metal may fly out when cutting into the accumulator. Put a cloth over the hacksaw when cutting the accumulator. Cut the accumulator slowly so that the gas will be released gradually.

      Tech Tips

      Nitrogen gas, which is colorless, odorless and harmless, will be discharged.