BRAKE ACTUATOR(for RHD) INSTALLATION

PROCEDURE

1. INSTALL BRAKE ACTUATOR ASSEMBLY

   
   

   1. Install the brake actuator assembly to the brake actuator bracket assembly with the 3 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      
      

      • Do not remove the hole plugs of a new brake actuator assembly before connecting the brake lines because the brake actuator assembly is filled with brake fluid.

      • Do not hold the brake actuator assembly by the connector.

      • Do not drop the brake actuator assembly when carrying it.

2. INSTALL BRAKE BOOSTER PUMP ASSEMBLY

   Click here