DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:P157800

DTC Code DTC Name
P157800 Brake System

DESCRIPTION

This DTC is stored when a malfunction is detected in the electronically controlled brake system. Check the electronically controlled brake system when DTC P157800 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
P157800 Brake System

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a malfunction in the electronically controlled brake system is detected for 0.2 seconds or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a malfunction in the electronically controlled brake system is detected for 0.2 seconds or more.

  • Electronically controlled brake system

  • Hybrid vehicle control ECU

CAUTION / NOTICE / HINT

Note


  • Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.

  • First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting

    Click here

PROCEDURE


  1. CHECK FOR DTCs (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)


    1. Check for DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      Electronically controlled brake system DTCs are not output A
      Electronically controlled brake system DTCs are output B

    B

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM Click here

    A

  2. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs

    2. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which dynamic radar cruise control operation is possible.

      2. Turn the dynamic radar cruise control system on using the cruise control main switch (ON/OFF button).

      3. w/ Full-speed range following function: Drive the vehicle at 5 km/h (3 mph) or more for 0.2 seconds or more.

        w/o Full-speed range following function: Drive the vehicle at 36 km/h (22 mph) or more for 0.2 seconds or more.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC P157800 is not output A
      DTC P157800 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE HYBRID VEHICLE CONTROL ECU Click here